MFA2 Series
The VELAN® MFA float trap automatically removes accumulated water from compressed air systems. Construction is similar to the Type MFT steam trap except there is no thermostatic element. A boss is provided on top of the cover, tapped for a NPS 3/8 (DN 10) air circulating pipe which is necessary unless the trap is fitted directly under and so close to the drain point that air entering the trap can escape back through the inlet.
GR 250 Cast Iron
Pressure Ranges
0-200 psig
Size Ranges
3/4"
1"
1 1/4"
1 1/2"
Standard Connections:
Socket weld
Threaded
Butt weld
Flanged
Features and Benefits
GR250 cast iron body and cover.
Unaffected by water hammer.
Self draining - WILL NOT FREEZE when installed in gravity draining position.
Pressure assisted fail-open design.
The advanced cage unit design in Velan air traps combines an air drain element, hardened Rc 58 min. ball valve and STELLITE6® hardfaced seat area all in one factory-tested unit.
WILL NOT PLUG due to copper and iron oxides in the system.